GSO ISO 21204:2022

Gulf Standard   Current Edition
Approved on  12 May 2022

Geometrical product specifications (GPS) — Transition specification

GSO ISO 21204:2022 Files

GSO ISO 21204:2022 Scope

This document defines a number of specification operators for the specification of extended edge transition features between features. An edge transition feature is an integral feature connecting two adjacent integral features. The extended edge transition feature includes portions of the adjacent features. All these specifications apply to any line in a defined direction in the extended edge transition feature. This document also defines the specification modifiers and the drawing indications for such transition specifications.

The proportions and dimensions of the graphical symbols to be used are also specified.

The specifications defined in this document are suitable for relatively simple edge transition functions, for example ensuring assembly without interference. For more complex functions, geometrical tolerancing offers more precise tools.

This document is by intention limited to only edge transition features between two planes and between a cylinder and a plane nominally perpendicular to it.

Annex A gives the first approach for an algorithm to identify toleranced features and adjacent reference sections. This algorithm is subject to change as more experience is gathered.

This document provides a set of tools to express several transition specifications. It does not present any information on the relationship between a function or a use and a transition specification.

NOTE 1 Corners (the transition between three or more features) are not edge transition features and are consequently not covered by this document.

NOTE 2 An edge transition feature exists between two single features. A defined edge transition feature has a defined nominal shape and is not sharp (r = 0).

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO OIML R121:2007
OIML R 121:1996 
Gulf Standard
The Scale of Relative Humidity of Air Certified Against Saturated Salt Solutions
GSO OIML R76-1:2009
OIML R 76-1:2006 
Gulf Standard
Non-automatic weighing instruments – Part 1: Metrological and technical requirements - Tests
GSO 1:1990
Gulf Standard
The international system of units Part 1: Quantities and base,supplementary and derived units.

Recently Published from Metrology Sector

GSO OIML R 129-3:2022
OIML R 129-3:2020 
Gulf Standard
Multi-dimensional measuring instruments Part 3: Test report format
GSO ISO 80000-2:2022
ISO 80000-2:2019 
Gulf Standard
Quantities and units — Part 2: Mathematics
GSO ISO 11553-1:2022
ISO 11553-1:2020 
Gulf Standard
Safety of machinery — Laser processing machines — Part 1: Laser safety requirements
GSO ISO 23276:2022
ISO 23276:2020 
Gulf Standard
Geometrical product specifications (GPS) — Surface texture: Profile method — Flowchart for PSm, RSm, WSm and Pc, Rc, Wc