GSO ASTM C1396/C1396M:2022

Gulf Standard   Current Edition
· Approved on 12 May 2022 ·

Standard Specification for Gypsum Board

GSO ASTM C1396/C1396M:2022 Files

GSO ASTM C1396/C1396M:2022 Scope

This specification covers gypsum boards which include the following: gypsum wallboard for use on walls, ceilings, or partitions and that affords a surface suitable to receive decoration; predecorated gypsum board for use as the finished surfacing for walls, ceilings, or partitions; gypsum backing board, coreboard, and shaftliner board for use as a base in multilayer systems or as a gypsum stud or core in semisolid or solid gypsum board partitions, or in shaft wall assemblies; water-resistant gypsum backing board to be used as a base for the application of ceramic or plastic tile on walls or ceilings; exterior gypsum soffit board for exterior soffits and carport ceilings that are completely protected from contact with liquid water; gypsum sheathing board for use as sheathing on buildings; gypsum base for veneer plaster; gypsum lath for use as a base for gypsum plaster application; and gypsum ceiling board for interior ceilings and walls. Gypsum board shall consist of a noncombustible core, essentially gypsum, surfaced with paper bonded to the core. The specimens shall comply with the following required physical properties: core, end, and edge hardness; straightness of the edges and ends; length; tapered edge depth; flexural strength; humidified deflection; nail pull resistance; permeance; water resistance; and surface water absorption.

Best Sellers From Construction and Building Sector

GSO 938:2009
 
Gulf Standard
Test Methods for Chemical Properties of Portland Cement
GSO 1915:2009
 
Gulf Standard
Test Methods for Physical Properties of Portland Cement ICS :
GSO 1431:2002
 
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
 
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets

Recently Published from Construction and Building Sector

GSO ASTM C31/C31M:2023
ASTM C31/C31M:22 
Gulf Standard
Standard Practice for Making and Curing Concrete Test Specimens in the Field
GSO ASTM C33/C33M:2023
ASTM C33/C33M:18 
Gulf Standard
Standard Specification for Concrete Aggregates
GSO ASTM A1063/A1063M:2023
ASTM A1063/A1063M:22 
Gulf Standard
Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
GSO ASTM C615/C615M:2023
ASTM C615/C615M:18e1 
Gulf Standard
Standard Specification for Granite Dimension Stone