GSO IEC/IEEE 60214-2:2022
IEC/IEEE 60214-2:2019
Gulf Standard
Current Edition
·
Approved on
12 May 2022
Tap-changers - Part 2: Application guidelines
GSO IEC/IEEE 60214-2:2022 Files
English
83 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC/IEEE 60214-2:2022 Scope
IEC/IEEE 60214-2:2019 is published as an IEC/IEEE Dual Logo standard and is intended to assist in the selection of tap-changers designed in accordance with IEC 60214-1 or IEEE Std C57.131 for use in conjunction with the tapped windings of transformers or reactors. Requirements, references and definitions relevant to either IEC 60214-1 or IEEE Std C57.131 are given and their use is described in Clause 4. It is also intended to assist in understanding the various types of tap-changers and their associated equipment available. These application guidelines cover on-load tap-changers (resistor and reactor types) and de-energized tap-changers. This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) title has been updated from "Application guide" to "Application guidelines";
b) tap-changers for gas-filled transformers have been added;
c) description of typical circuits for regulation has been added;
d) description of basic arrangements of tapped windings with on-load tap-changers and de-energized tap-changers has been added;
e) types of tap-changers are explained in more detail (e.g. vacuum type on-load tap-changer) and new types have been added (e.g. step-voltage regulator, advance retard switch (ARS), on-load tap-changers for distribution transformers);
f) selection of tap-changers (on-load and de-energized) are described in more detail with respect to applications and parameters, which have to be considered (e.g. current wave shapes, operating pressure, temperature conditions, overloading conditions, continuous consecutive operations);
g) storage and installation has been considered;
h) field service, including commissioning, operation, maintenance and monitoring, has been considered;
i) safety aspects have been updated.
Keywords: tap-changers
a) title has been updated from "Application guide" to "Application guidelines";
b) tap-changers for gas-filled transformers have been added;
c) description of typical circuits for regulation has been added;
d) description of basic arrangements of tapped windings with on-load tap-changers and de-energized tap-changers has been added;
e) types of tap-changers are explained in more detail (e.g. vacuum type on-load tap-changer) and new types have been added (e.g. step-voltage regulator, advance retard switch (ARS), on-load tap-changers for distribution transformers);
f) selection of tap-changers (on-load and de-energized) are described in more detail with respect to applications and parameters, which have to be considered (e.g. current wave shapes, operating pressure, temperature conditions, overloading conditions, continuous consecutive operations);
g) storage and installation has been considered;
h) field service, including commissioning, operation, maintenance and monitoring, has been considered;
i) safety aspects have been updated.
Keywords: tap-changers
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners

GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES

BH GSO 34:2015
GSO 34:2007
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES


GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines

Recently Published from Electrical Sector
GSO IEC 60287-2-1:2025
IEC 60287-2-1:2023
Gulf Standard
Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance


GSO IEC 62271-101:2025
IEC 62271-101:2021
Gulf Standard
High-voltage switchgear and controlgear - Part 101: Synthetic testing


GSO IEC TR 63396:2025
IEC TR 63396:2021
Gulf Standard
Noise measurement method on power capacitors


GSO IEC TS 61850-7-7:2025
IEC TS 61850-7-7:2018
Gulf Standard
Communication networks and systems for power utility automation - Part 7-7: Machine-processable format of IEC 61850-related data models for tools

