GSO IEC/IEEE 62271-37-013:2022

Gulf Standard   Current Edition
Approved on  12 May 2022

High-voltage switchgear and control gear - Part 37-013: Alternating-current generator circuit-breakers

High voltage switchgear and controlgear
Including enclosed switchgear and controlgear

GSO IEC/IEEE 62271-37-013:2022 Files

GSO IEC/IEEE 62271-37-013:2022 Scope

IEC/IEEE 62271-37-013:2015(E) is applicable to three-phase a.c. high-voltage generator circuit-breakers, hereafter called generator circuit-breaker, designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 kV and up to 38 kV. It is applicable to generator circuit-breakers that are installed between the generator and the transformer terminals. Requirements relative to generator circuit-breakers intended for use with generators and transformers rated 10 MVA or more are covered specifically. Generator circuits rated less than 10 MVA and pumped storage installations are considered special applications, and their requirements are not completely covered by this standard. This standard is also applicable to the operating mechanisms of generator circuit-breakers and to their auxiliary equipment. This standard has been prepared by a joint working group comprised of members both from IEC 17A/WG 52 representing subcommittee 17A: High-voltage switchgear and controlgear, of IEC technical committee 17: Switchgear and controlgear, in cooperation with IEEE WG P62271-37-013 representing the Switchgear Committee of the Power and Energy Society of the IEEE, under the IEC/IEEE Dual Logo Agreement.
The contents of the corrigendum of June 2017 have been included in this copy.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007 
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines

Recently Published from Electrical Sector

GSO IEC 62568:2022
IEC 62568:2015 
Gulf Standard
Overhead lines - Method for fatigue testing of conductors
GSO IEC 60076-22-2:2022
IEC 60076-22-2:2019 
Gulf Standard
Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators
GSO IEC 62125:2022
IEC 62125:2019 
Gulf Standard
Environmental considerations specific to insulated electrical power and control cables
GSO IEC 60076-3:2022
IEC 60076-3:2018 
Gulf Standard
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air