GSO EN 17281:2023
EN 17281:2021
Gulf Standard
Current Edition
·
Approved on
03 May 2023
Safety requirements - Vehicle cleaning equipment
GSO EN 17281:2023 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO EN 17281:2023 Scope
This document contains technical safety requirements for the design, equipment and testing of brushless vehicle washing systems and vehicle washing systems with brushes for, indoor and outdoor operation, i.e. roll-over vehicle washing systems, vehicle washing tunnels, manually movable vehicle washing facilities.
This document does not apply to hand-guided high pressure cleaners which are covered by
EN 60335 2-79:2012, to water recycling systems, buildings and doors for entering the traffic zone, for powered ride-on machines and powered walk-behind machines with a traction drive.
NOTE Signals (example doors, lighting systems) can be provided by the vehicle washing system.
This document contains requirements for the protection of persons and objects from accidents and damages during use and operation of vehicle washing systems.
Persons to be protected are:
- operators,
- maintenance and monitoring personnel,
- persons in the vicinity of vehicle washing systems,
- persons sitting in the vehicle during cleaning.
Objects to be protected are:
- vehicles.
Significant hazards associated with vehicle washing systems are listed in Clause 4. These hazards have been established by a risk assessment according to EN ISO 12100 and require measures to eliminate the hazard or to reduce the risk. These measures are specified in Clause 5 of this document.
The safety requirements assume that vehicle washing systems are regularly maintained by trained and competent persons according to the manufacturer's information and that the operators, with the exception of users of self-service washing systems, have been instructed in the handling of vehicle washing systems.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS

BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS


GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS

BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS


Recently Published from Mechanical Sector
GSO ISO 24131-1:2024
ISO 24131-1:2023
Gulf Standard
Internal protection by polymeric lining for ductile iron pipes
— Requirements and test methods
— Part 1: Polyurethane lining


GSO EN 13445-10:2024
EN 13445-10:2021
Gulf Standard
Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys

GSO ISO 17677-1:2024
ISO 17677-1:2021
Gulf Standard
Resistance welding
— Vocabulary
— Part 1: Spot, projection and seam welding


GSO ISO 4548-14:2024
ISO 4548-14:2023
Gulf Standard
Methods of test for full-flow lubricating oil filters for internal combustion engines
— Part 14: Hydraulic pulse durability for composite filter housings

