GSO ASTM C33/C33M:2023

ASTM C33/C33M:18
Gulf Standard   Current Edition · Approved on 10 September 2023

Standard Specification for Concrete Aggregates

GSO ASTM C33/C33M:2023 Files

GSO ASTM C33/C33M:2023 Scope

This specification defines the requirements for grading and quality of fine and coarse aggregate for use in concrete. Fine aggregate shall consist of natural sand, manufactured sand, or a combination thereof. Fine aggregate shall be free of injurious amounts of organic impurities. Fine aggregate for use in concrete that will be subject to wetting, extended exposure to humid atmosphere, or contact with moist ground shall not contain any materials that are deleteriously reactive with the alkalis in the cement in amount sufficient to cause excessive expansion of mortar or concrete. Fine aggregate subjected to five cycles of the soundness test shall have a required weighted average loss. Coarse aggregate shall consist of gravel, crushed gravel, crushed stone, air-cooled blast furnace slag, or crushed hydraulic-cement concrete, or a combination thereof. The sampling and test methods shall be done with grading and fineness modulus test, organic impurities test, effect of organic impurities on strength test, soundness test, clay lumps and friable particles test, coal and lignite test, bulk density of slag test, abrasion of coarse aggregate test, reactive aggregate test, freezing and thawing test, and chert test method.

Best Sellers From Construction and Building Sector

GSO 1431:2002
 
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
 
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
 
Gulf Standard
Design and application of speed control humps
GSO 440:2007
 
Gulf Standard
Calcium Silicate bricks

Recently Published from Construction and Building Sector

GSO ASTM E1264:2024
ASTM E1264:23 
Gulf Standard
Standard Classification for Acoustical Ceiling Products
GSO ASTM C119:2024
ASTM C119:23 
Gulf Standard
Standard Terminology Relating to Dimension Stone
GSO ISO 24068-2:2024
ISO 24068-2:2021 
Gulf Standard
Building and civil engineering sealants — Determination of the degree of cure — Part 2: Build-up of tensile and adhesion properties in test joint specimens
GSO ASTM C887:2024
ASTM C887:20 
Gulf Standard
Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar