GSO IEC 60755-1:2024

IEC 60755-1:2022
Gulf Standard   Current Edition · Approved on 31 January 2024

General safety requirements for residual current operated protective devices - Part 1: Residual current operated protective devices for DC systems

GSO IEC 60755-1:2024 Files

English 32 Pages
Current Edition Reference Language

GSO IEC 60755-1:2024 Scope

IEC 60755-1:2022 gives requirements, recommendations and information for the drafting of standards for residual current operated protective devices, intended to be used in DC systems, hereafter referred to as DC-RCDs.
This group safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. It is not intended for use by manufacturers or certification bodies.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007 
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines

Recently Published from Electrical Sector

GSO IEC 61643-41:2026
IEC 61643-41:2025 
Gulf Standard
Low-voltage surge protective devices - Part 41: Surge protective devices connected to DC low-voltage power systems – Requirements and test methods
GSO IEC TS 62600-100:2026
IEC TS 62600-100:2024 
Gulf Standard
Marine energy - Wave, tidal and other water current converters - Part 100: Electricity producing wave energy converters - Power performance assessment
GSO ISO 9059:2026
ISO 9059:2025 
Gulf Standard
Solar energy — Calibration of pyrheliometers by comparison to a reference pyrheliometer
GSO IEC 63277-3-1:2026
IEC 63277-3-1:2025 
Gulf Standard
Binary power generation systems - Part 3-1: Safety requirements - System with less than 500 kW in capacity