GSO IEC 61300-3-30:2024
IEC 61300-3-30:2020
Gulf Standard
Current Edition
·
Approved on
31 January 2024
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Endface geometry of rectangular ferrule
GSO IEC 61300-3-30:2024 Files
English
41 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 61300-3-30:2024 Scope
IEC 61300-3-30:2020 is available as IEC 61300-3-30:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61300-3-30:2020 describes a method of measuring the end face geometry of rectangular multifibre ferrules having an IEC defined optical interface. The primary attributes are fibre position relative to the end face, either withdrawal or protrusion, end face angle relative to the guide pin bores, fibre tip radii and core dip for multimode fibres. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition:
- measurement of the individual fibre tip radii;
- introduction of the geometry limit (GL) metric;
- introduction of the minus coplanarity metric;
- new method for measuring the core dips;
- all measurement regions are now identical for MM and SM fibres;
- the ferrule surface angle sign convention has been changed.
IEC 61300-3-30:2020 describes a method of measuring the end face geometry of rectangular multifibre ferrules having an IEC defined optical interface. The primary attributes are fibre position relative to the end face, either withdrawal or protrusion, end face angle relative to the guide pin bores, fibre tip radii and core dip for multimode fibres. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition:
- measurement of the individual fibre tip radii;
- introduction of the geometry limit (GL) metric;
- introduction of the minus coplanarity metric;
- new method for measuring the core dips;
- all measurement regions are now identical for MM and SM fibres;
- the ferrule surface angle sign convention has been changed.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO 2693:2026
Gulf Technical Regulation
The GCC Terrestrial Radio Receiver Specifications for AM/FM/T-DAB+
GSO IEC TS 63542:2026
IEC TS 63542:2024
Gulf Standard
Refrigerant detection systems for flammable refrigerants
GSO EN 54-17:2026
EN 54-17:2005
Gulf Standard
Fire detection and fire alarm systems - Part 17: Short-circuit isolators
GSO IEC 60335-2-79:2026
IEC 60335-2-79:2021
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners