GSO EN 17128:2024
EN 17128:2020
Gulf Standard
Current Edition
·
Approved on
31 January 2024
Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use - Personal light electric vehicles (PLEV) - Requirements and test methods
GSO EN 17128:2024 Files
English
86 Pages
Current Edition
Reference Language
GSO EN 17128:2024 Scope
This document applies to personal light electric vehicles totally or partially electrically powered from self-contained power sources with or without self-balancing system, with exception of vehicles intended for hire from unattended station.
This document applies to personal light electric vehicles with or without self-balancing system totally or partially electrically powered from self-contained power sources having battery voltages up to 100 VDC, with or without an integrated battery charger with up to a 240 VAC input. This document specifies safety requirements, test methods, marking and information relating to personal light electric vehicles to reduce the risk of injuries to both third parties and the user during intended use, i.e. when used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer.
This document does not apply to:
- vehicles that are considered as toys;
- vehicles without self-balancing system with a seat;
- vehicles intended for competition;
- electrically powered assisted cycles (EPAC);
- vehicles and/or devices intend for use for medical care;
- electric vehicles having a maximum design speed above 25 Km/h;
- vehicles having a rated voltage of more than 100 VDC or 240 VAC;
- vehicles without an on-board driving operator.
NOTE 1 EN ISO 13482 gives the requirements for vehicles without on-board driving operator.
NOTE 2 See D.2.
NOTE 3 The local regulation could limit the use of the vehicle to a speed lower than 25 km/h.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO 24131-1:2024
ISO 24131-1:2023
Gulf Standard
Internal protection by polymeric lining for ductile iron pipes
— Requirements and test methods
— Part 1: Polyurethane lining
GSO EN 13445-10:2024
EN 13445-10:2021
Gulf Standard
Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
GSO ISO 17677-1:2024
ISO 17677-1:2021
Gulf Standard
Resistance welding
— Vocabulary
— Part 1: Spot, projection and seam welding
GSO ISO 4548-14:2024
ISO 4548-14:2023
Gulf Standard
Methods of test for full-flow lubricating oil filters for internal combustion engines
— Part 14: Hydraulic pulse durability for composite filter housings