GSO ISO 21384-2:2024

Gulf Standard   Current Edition
· Approved on 25 April 2024 ·

Unmanned aircraft systems — Part 2: UAS components

Aircraft and space vehicles in general
Including aircraft performance, flight dynamics, etc.

GSO ISO 21384-2:2024 Files

English 38 Pages
Current Edition Reference Language
74.52 BHD

GSO ISO 21384-2:2024 Scope

This document specifies requirements for ensuring the quality and safety of the design and manufacture of unmanned aircraft systems (UAS) that include unmanned aircraft (UA), remote pilot stations (RPS), datalinks, payloads, and associated support equipment.

This document includes information regarding the unmanned aircraft, any associated remote pilot station (RPS)(s), the command and control links (C2 Link), any other required data links (e.g. payload, traffic management information, vehicle identification) and any other system elements as can be required. This document does not cover passenger carrying UAS or technical requirements for the design and manufacturing for UAS components.

This document does not include equipment considerations unique to compliance with UA traffic management systems.

The document is applicable to the reasonable expected use of a UAS.

This document is applicable:

a) to UAS designed for use where a State aviation authority has determined a Certificate of Airworthiness (C of A) is not required;

b) where a C of A is required, to complement technical standards published by the aviation authority for the purposes of building the certification basis; or

c) as an alternative means of compliance if acceptable to the aviation authority.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015 
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993 
Bahraini Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ASTM D4778:2024
ASTM D4778:15 
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 21384-2:2024
ISO 21384-2:2021 
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
GSO ISO 22407:2024
ISO 22407:2021 
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
GSO ISO 11114-6:2024
ISO 11114-6:2022 
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing