GSO ASTM A555/A555M:2024
Gulf Standard
Current Edition
·
Approved on
25 April 2024
·
Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
GSO ASTM A555/A555M:2024 Files
No files are available for this standard right now!
GSO ASTM A555/A555M:2024 Scope
This specification covers general requirements that shall apply to stainless wire and wire rods. Wire is intended primarily for cold forming, including coiling, stranding, weaving, heading and machining as covered under the required specifications. The material may be furnished in one of the conditions detailed in the applicable material specification, that is, annealed, bright annealed, or cold worked. Intergranular corrosion test, grain size test, tension test, and chemical analysis shall conform to the chemical and mechanical requirements of the material specification.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Construction and Building Sector
GSO ASTM E2129:2024
ASTM E2129:18
Gulf Standard
Standard Practice for Data Collection for Sustainability Assessment of Building Products
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ISO 10563:2024
ISO 10563:2023
Gulf Standard
Building and civil engineering sealants — Determination of change in mass and volume
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 933-2:2024
EN 933-2:2020
Gulf Standard
Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)