GSO ASTM C126:2024

ASTM C126:22
Gulf Standard   Current Edition · Approved on 14 October 2024

Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

GSO ASTM C126:2024 Files

GSO ASTM C126:2024 Scope

1.1 This specification covers structural clay load-bearing facing tile and facing brick and other “solid masonry units” made from clay, shale, fire-clay, or mixtures thereof, with or without the addition of grog or other mixtures, having a finish consisting of a ceramic glaze fused to the body at above 1500°F (655°C) making them inseparable, excluding natural salt-glazed ware.

1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of brick and tile extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 6) of this standard is beyond the scope of this specification.

1.3 Brick and tile covered by this specification are manufactured from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength requirements of this specification. (See firing and fired bond in Terminology C1232.)

1.4 Two grades and two types of ceramic glazed units are covered.

1.5 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.7 The following precautionary caveat pertains only to the test portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Best Sellers From Construction and Building Sector

GSO 1431:2002
 
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
 
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1421:2002
 
Gulf Technical Regulation
Hollow blocks made from clay for walls
GSO 2084:2010
 
Gulf Standard
Design and application of speed control humps

Recently Published from Construction and Building Sector

GSO ASTM C119:2024
ASTM C119:23 
Gulf Standard
Standard Terminology Relating to Dimension Stone
GSO ISO 24068-2:2024
ISO 24068-2:2021 
Gulf Standard
Building and civil engineering sealants — Determination of the degree of cure — Part 2: Build-up of tensile and adhesion properties in test joint specimens
GSO ASTM C887:2024
ASTM C887:20 
Gulf Standard
Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
GSO ASTM C629/C629M:2024
ASTM C629/C629M:22 
Gulf Standard
Standard Specification for Slate Dimension Stone