GSO EN 13445-6:2024

EN 13445-6:2021
Gulf Standard   Current Edition · Approved on 14 October 2024

Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

GSO EN 13445-6:2024 Files

English 63 Pages
Current Edition Reference Language

GSO EN 13445-6:2024 Scope

This document specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than: - 100 bar when containing gases or liquids in group 1 or 2 - 1000 bar when containing liquids in group 2 only. and shell wall thicknesses not exceeding 60 mm, which are constructed of ferritic or austenitic spheroidal graphite cast iron. The thickness limitation of the shell does not apply to thickness of flanges, reinforcements, bosses etc. NOTE 1 Austenitic spheroidal graphite cast iron grades are principally used for high and low temperature applications and for their corrosion resistance properties. NOTE 2 The allowable grades of spheroidal graphite cast iron are listed in Tables 5.1-1 and 5.1-2. Service conditions are given in Clause 4. This document, EN 13445-6, does not include lamellar graphite cast iron grades for ferritic and austenitic grades with, with an elongation after fracture equal or less than 15 % which are explicitly excluded. Requirements for the use of cast irons with an elongation after fracture equal or less than 15 % are given in EN 15776.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 1780:2010
 
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements

Recently Published from Mechanical Sector

GSO ISO 4254-9:2026
ISO 4254-9:2018 
Gulf Standard
Agricultural machinery — Safety — Part 9: Seed drills
GSO ISO 6531:2026
ISO 6531:2024 
Gulf Standard
Machinery for forestry — Portable chain-saws — Vocabulary
GSO EN 13001-3-1:2026
EN 13001-3-1:2025 
Gulf Standard
Cranes - General design - Part 3-1: Limit states and proof competence of steel structure
GSO ISO 16625:2026
ISO 16625:2025 
Gulf Standard
Cranes and hoists — Selection of wire ropes, drums and sheaves