GSO ISO 12759-6:2025
ISO 12759-6:2024
Gulf Standard
Current Edition
·
Approved on
14 October 2025
Fans — Efficiency classification for fans — Part 6: Calculation of the fan energy index
GSO ISO 12759-6:2025 Files
English
40 Pages
Current Edition
Reference Language
82.8 BHD
GSO ISO 12759-6:2025 Scope
This document defines the calculation method for determining the fan energy index (FEI), which is an energy efficiency metric for fan duty points. This metric provides a standardized and consistent basis to compare fan energy performance across fan types and sizes at a given fan duty point.
This document is applicable to fans driven by electric motors and fans without drives. It is not applicable to circulating fans or air curtains.
The fan energy index can only be calculated for fan duty points above a minimum air power of 125 W (where air power is the product of volume flow rate and fan static pressure) or above a minimum volume flow rate of 2,0 m3/s.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 60691:2025
IEC 60691:2023
Gulf Standard
Thermal-links - Requirements and application guide
GSO IEC 60335-2-65:2025
IEC 60335-2-65:2023
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
GSO IEC 62841-2-18:2025
IEC 62841-2-18:2024
Gulf Standard
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-18: Particular requirements for hand-held strapping tools
GSO IEC 63241-1:2025
IEC 63241-1:2023
Gulf Standard
Electric motor-operated tools - Dust measurement procedure - Part 1: General requirements