ISO 13628-5:2009

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١١ ديسمبر ٢٠٠٩

Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals

ملفات الوثيقة ISO 13628-5:2009

الإنجليزية 168 صفحات
الإصدار الحالي
94.24 BHD

مجال الوثيقة ISO 13628-5:2009

ISO 13628-5:2009 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries. Ancillary equipment does not include top side hardware. Topside hardware refers to any hardware that is not permanently attached to the umbilical, above the topside hang-off termination.

ISO 13628-5:2009 applies to umbilicals containing components, such as electrical cables, optical fibres, thermoplastic hoses and metallic tubes, either alone or in combination; and to umbilicals for static or dynamic service, with surface-surface, surface-subsea and subsea-subsea routings .

ISO 13628-5:2009 does not apply to the associated component connectors, unless they affect the performance of the umbilical or that of its ancillary equipment.

ISO 13628-5:2009 applies only to tubes with the following dimensions: wall thickness, t  6 mm, internal diameter, ID  50,8 mm (2 in). Tubular products greater than these dimensions can be regarded as pipe/linepipe and it is expected that they be designed and manufactured according to a recognised pipeline/linepipe standard.

ISO 13628-5:2009 does not apply to a tube or hose rated lower than 7 MPa (1 015 psi), or to electric cable voltage ratings above standard rated voltages = 3,6/6(7,2) kV rms, where U0, U and Um are as defined in IEC 60502-1 and IEC 60502-2.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 14617-1:2025
 
مواصفة قياسية دولية
Graphical symbols for diagrams — Part 1: General rules
ISO/IEC TS 18661-4:2025
 
مواصفة قياسية دولية
Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 4: Supplementary functions
ISO/IEC TS 18661-5:2025
 
مواصفة قياسية دولية
Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 5: Supplementary attributes
ISO 8871-5:2025
 
مواصفة قياسية دولية
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing