ISO 7027-1:2016

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  09 يونيو 2016

Water quality — Determination of turbidity — Part 1: Quantitative methods

ملفات الوثيقة ISO 7027-1:2016

الإنجليزية 9 صفحات
الإصدار الحالي
24.75 BHD

مجال الوثيقة ISO 7027-1:2016

ISO 7027-1:2016 specifies two quantitative methods using optical turbidimeters or nephelometers for the determination of turbidity of water:

a) nephelometry, procedure for measurement of diffuse radiation, applicable to water of low turbidity (for example drinking water);

b) turbidimetry, procedure for measurement of the attenuation of a radiant flux, more applicable to highly turbid waters (for example waste waters or other cloudy waters).

Turbidities measured according to the first method are presented as nephelometric turbidity units (NTU). The results typically range between <0,05 NTU and 400 NTU. Depending on the instrument design, it can also be applicable to waters of higher turbidity. There is numerical equivalence of the units NTU and formazin nephelometric unit (FNU).

Turbidity measured by the second method is expressed in formazin attenuation units (FAU), results typically range between 40 FAU and 4 000 FAU.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 4491-1:2023
 
مواصفة قياسية دولية
Metallic powders — Determination of oxygen content by reduction methods — Part 1: General guidelines
ISO 6613:2023
 
مواصفة قياسية دولية
Windows and doors — Air permeability — Test method
ISO 527-4:2023
 
مواصفة قياسية دولية
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 3977-2:2023
 
مواصفة قياسية دولية
Gas turbines — Procurement — Part 2: Standard reference conditions and ratings