ISO/TS 20458:2023

International Standard   Current Edition
· Approved on 26 July 2023 ·

Road vehicles — Design and performance specifications for advanced Pedestrian Legform Impactor (aPLI)

Road vehicles in general
Including testing and recycling of road vehicles

ISO/TS 20458:2023 Files

null Pages
Current Edition

ISO/TS 20458:2023 Scope

This document provides definitions, symbols, mechanical requirements, certification test procedure, electronic subsystem requirements and user’s manual for advanced pedestrian legform impactor (aPLI), a standardized pedestrian legform impactor with an upper mass for pedestrian subsystem testing of road vehicles. It is applicable to impact tests involving:

     vehicles of category M1, except vehicles with the maximum mass above 2 500 kg and which are derived from N1 category vehicles and where the driver’s position, R-point, is either forward of the front axle or longitudinally rearwards of the front axle transverse centreline by a maximum of 1 100 mm;

     vehicles of category N1, except where the driver’s position, R-point, is either forward of the front axle or longitudinally rearwards of the front axle transverse centreline by a maximum of 1 100 mm;

     impacts to the bumper test area as defined by UN R127[1] and UN GTR No.9[2];

     pedestrian subsystem tests involving use of a legform for the purpose of evaluating compliance with vehicle safety standards.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-1:2015
GSO 150-1:2013 
Bahraini Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates
GSO 150-1:2013
 
Gulf Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates

Recently Published

ISO/IEC 14763-3:2024
 
International Standard
Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling
ISO 12625-5:2024
 
International Standard
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
ISO 11772:2024
 
International Standard
Hot-rolled longitudinally profiled steel plate
ISO 24146-1:2024
 
International Standard
Ships and marine technology — Shipboard waste on inland navigation vessels — Part 1: On board management and handling