ISO 17201-6:2021

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  01 يوليو 2021

Acoustics — Noise from shooting ranges — Part 6: Sound pressure measurements close to the source for determining exposure to sound

الضجيج وتأثيره على الإنسان
* يشمل قياس السمع * واقيات الأذن، انظر 13.340.20 * الصوتيات والقياسات الصوتية، انظر 17.140
الهندسة العسكرية. الشئون العسكرية. الأسلحة
* الملابس العسكرية، انظر 61.020
المرافق الرياضية
* تشمل برك السباحة، الملاعب الرياضية، ميادين السباق والجري ، الخ
الضجيج المنبعث من الآلات والمعدات
* تُستخدم المواصفات الواردة في هذا القسم أيضاً مع أقسام أخرى و/أو تقسيمات فرعية وفقاً لموضوعاتها

ملفات الوثيقة ISO 17201-6:2021

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 17201-6:2021

This document specifies methods for recording the time history of the sound pressure produced either by shooting with calibres of less than 20 mm, or by detonation of explosive charges of less than 50 g TNT equivalent, within the shooting range at locations of interest, regarding the exposure to sound of the shooter, or any other person within the shooting range. The time history of the sound pressure can be the basis for further analyses of this type of sound at the locations of interest.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013 
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21978:2023
 
مواصفة قياسية دولية
Air to water heat pumps — Testing and rating at part load conditions and calculation of seasonal coefficient of performance for space heating
ISO 12643-2:2023
 
مواصفة قياسية دولية
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems
ISO 4266-2:2023
 
مواصفة قياسية دولية
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
ISO 12643-3:2023
 
مواصفة قياسية دولية
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems