ISO 11665-6:2020

International Standard   Current Edition

Measurement of radioactivity in the environment — Air: radon-222 — Part 6: Spot measurement methods of the activity concentration

Scope

This document describes radon-222 spot measurement methods. It gives indications for carrying out spot measurements, at the scale of a few minutes at a given place, of the radon activity concentration in open and confined atmospheres.

This measurement method is intended for rapid assessment of the radon activity concentration in the air. The result cannot be extrapolated to an annual estimate of the radon activity concentration. This type of measurement is therefore not applicable for assessment of the annual exposure or for determining whether or not to mitigate citizen exposures to radon or radon decay products.

The measurement method described is applicable to air samples with radon activity concentration greater than 50 Bq·m−3.

NOTE For example, using an appropriate device, the radon activity concentration can be spot measured in the soil and at the interface of a material with the atmosphere (see also ISO 11665-7[8]).

Prepare
13 January 2020
Radiation measurements
Including dosimetry

Files

English 13 Pages
Current Edition
34.49 BHD
 

Related Standards

revises
ISO 11665-6:2012
 
Historical
International Standard
Measurement of radioactivity in the environment — Air: radon-222 — Part 6: Spot measurement method of the activity concentration

Best Sellers

GSO 9:2013
 
Gulf Technical Regulation
Labeling of prepackaged food stuffs
BH GSO 9:2015
GSO 9:2013 
Bahraini Technical Regulation
Labeling of prepackaged food stuffs
GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates

Recently Published

CLC/TS 50600-5-1:2021
 
International Standard
Information technology - Data centre facilities and infrastructures - Part 5-1: Maturity Model for Energy Management and Environmental Sustainability
EN 50491-12-2:2022
 
International Standard
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 12-2: Smart grid - Application specification - Interface and framework for customer - Interface between the Home / Building CEM and Resource manager(s) - Data model and messaging
EN IEC 60947-5-2:2020/A11:2022
 
International Standard
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
EN IEC 60598-1:2021/A11:2022
 
International Standard
Luminaires - Part 1: General requirements and tests