ISO 24212:2024

International Standard   Current Edition · Approved on 20 September 2024

Remediation techniques applied at contaminated sites

ISO 24212:2024 Files

English 99 Pages
Current Edition
BHD 103.62

ISO 24212:2024 Scope

This document provides requirements and guidance on key aspects of remediation techniques. It describes the principles, main characteristics, advantages and limitations to be considered in the selection within an option appraisal of individual or combinations of in situ and on-site remediation techniques, including:

—     the type of contaminants to be dealt with;

—     current and/or intended site use;

—     local legal, policy, socio-economic and environmental contexts.

This document is applicable to the remediation of contaminated sites, i.e. where soil, or soil gas, ambient air or groundwater are contaminated. It identifies which phase/matrix can be targeted by a technique, e.g. fluid (groundwater, gas, non-aqueous phase liquid) or solid, and which contaminant it can applied to. This document also provides information on hazards that can be associated with the implementation of remediation.

This document does not provide:

—     an exhaustive list of remediation techniques;

—     guidance on sites contaminated with radioactive substances, pathogenic or infectious agents, or “pyrotechnic devices” (e.g. unexploded ordnances);

—     guidance on ex situ techniques that are set up off-site;

—     a framework that covers all individual situations, or prescribes which technique(s) to use in a specific context.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
GSO 9:2022
 
Gulf Technical Regulation
Labeling of prepackaged food stuffs
BH GSO 9:2023
GSO 9:2022 
Bahraini Technical Regulation
Labeling of prepackaged food stuffs

Recently Published

ISO 20816-3:2026
 
International Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machines with operating speeds between 120 r/min and 30 000 r/min
ISO 20816-1:2026
 
International Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
ISO 23375:2026
 
International Standard
Intelligent transport systems — Collision evasive lateral manoeuvre systems (CELM) — Requirements and test procedures
ISO 18722-2:2026
 
International Standard
Tobacco heating systems — Determination of aerosol collected mass and nicotine in the aerosol with a puffing regime according to the ISO 5501 series — Part 2: Aerosol heated tobacco products (aHTPs)