ISO/IEC 18000-63:2021

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٧ نوفمبر ٢٠٢١

Information technology — Radio frequency identification for item management — Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C

ملفات الوثيقة ISO/IEC 18000-63:2021

الإنجليزية 332 صفحات
الإصدار الحالي
104.37 BHD

مجال الوثيقة ISO/IEC 18000-63:2021

This document defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz industrial, scientific, and medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used to develop RFID application standards. This document is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace.

It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface.

This document specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, i.e. a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator.

This document specifies

—    physical interactions (the signalling layer of the communication link) between Interrogators and tags;

—    logical operating procedures and commands between Interrogators and Tags;

—    the collision arbitration scheme used to identify a specific tag in a multiple-tag environment;

—    optional security commands that allow the use of crypto suites of ISO/IEC 29167.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 1952:2025
 
مواصفة قياسية دولية
Coal — Determination of extractable metals in dilute hydrochloric acid
ISO 5834-1:2025
 
مواصفة قياسية دولية
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
ISO 5834-3:2025
 
مواصفة قياسية دولية
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods after gamma irradiation in air
ISO 15238:2025
 
مواصفة قياسية دولية
Coal — Determination of total cadmium