ISO 8217:2024

International Standard   Current Edition · Approved on 30 May 2024

Products from petroleum, synthetic and renewable sources — Fuels (class F) — Specifications of marine fuels

ISO 8217:2024 Files

English 41 Pages
Current Edition
83.79 BHD

ISO 8217:2024 Scope

This document in its entirety defines the general requirements and specifications for fuels used in marine diesel engines and boilers, prior to onboard fuel handling (storage, settling, centrifuging, filtration, heating) before use.

For the purposes of this document, the term “fuels” comprises of the following:

    hydrocarbons from petroleum crude oil, oil sands and shale oil;

    synthetic hydrocarbons, renewable hydrocarbons or hydrocarbons from recycled sources, with molecular structures that are indistinguishable from petroleum hydrocarbons;

    fatty acid methyl ester (FAME), where permitted as specified in this document;

    blends of any of the above, where permitted as specified in this document.

The general requirements and specifications for fuels in this document can also be applied to fuels used in stationary diesel engines of the same or similar type as those used for marine purposes.

This document specifies seven categories of distillate fuels, one of which is for diesel engines used for emergency purposes. It also specifies four categories of residual fuels for sulfur content at or below 0,50 % by mass, five categories of residual fuels containing FAME and five categories of residual fuels for sulfur content exceeding 0,50 % by mass.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 16408:2025
 
International Standard
Dentistry — Oral care products — Oral rinses
ISO 16383-1:2025
 
International Standard
Geotechnical investigation and testing — Laboratory testing of rock — Part 1: Determination of water content
ISO 2361:2025
 
International Standard
Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method
ISO/TS 6226:2025
 
International Standard
Health informatics — Reference architecture for syndromic surveillance systems for infectious diseases