ISO 2929:2021

International Standard   Current Edition

Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

Scope

This document specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 1,0 MPa (10 bar).

Both groups of hoses are designed for

a) use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds, and

b) operation within the temperature range of −30 °C to +70 °C, undamaged by climatic conditions of −50 °C to +70 °C when stored in static conditions.

NOTE      Hoses for use at temperatures lower than −30 °C can be the subject of discussion between manufacturer and end user.

This document is not applicable to hoses and hose assemblies for LPG systems, aviation fuel systems, fuel station systems or marine applications.

Prepare
17 September 2021
Petroleum products and natural gas handling equipment
Including petroleum and natural gas storage devices, distribution systems, pipelines, petrol stations, dispensing devices, etc.

Files

null Pages
Current Edition
null null
 

Related Standards

revises
ISO 2929:2014
 
Historical
International Standard
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

Best Sellers

GSO 9:2013
 
Gulf Technical Regulation
Labeling of prepackaged food stuffs
BH GSO 9:2015
GSO 9:2013 
Bahraini Technical Regulation
Labeling of prepackaged food stuffs
GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates

Recently Published

ISO/TR 20580:2022
 
International Standard
Preparation of metallographic specimens
ISO 6362-1:2022
 
International Standard
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
ISO 6362-4:2022
 
International Standard
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Tolerances on form and dimensions for profiles
ISO 6362-2:2022
 
International Standard
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties