ISO 13168:2023

 
International Standard   Current Edition
· Approved on 27 November 2023 ·

Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting

Radiation protection
Including protection against radio-frequency radiation

ISO 13168:2023 Files

English 19 Pages
Current Edition
56.09 BHD

ISO 13168:2023 Scope

This document specifies a method for the simultaneous measurement of 3H and 14C in water samples by liquid scintillation counting of a source obtained by mixing the water sample with a hydrophilic scintillation cocktail.

The method presented in this document is considered a screening method because of the potential presence of interfering radionuclides in the test sample. However, if the sample is known to be free of interfering radionuclides then 3H and 14C can be measured quantitatively.

The method can be used for any type of environmental study or monitoring.

This method is applicable to test samples of supply/drinking water, rainwater, surface and ground water, marine water, as well as cooling water, industrial water, domestic, and industrial wastewater having an activity concentration ranging from 5 Bq∙l-1 to 106 Bq∙l-1 (upper limit of the liquid scintillation counters for direct counting). For higher activity concentrations, the sample can be diluted to obtain a test sample within this range.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 22476-16:2024
 
International Standard
Geotechnical investigation and testing — Field testing — Part 16: Borehole shear test
ISO 16733-1:2024
 
International Standard
Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios
ISO 21771-1:2024
 
International Standard
Cylindrical involute gears and gear pairs — Part 1: Concepts and geometry
ISO 5727:2024
 
International Standard
Accessibility and usability of the built environment — Accessibility of immovable cultural heritage — Principles and methodology for interventions