ISO 19085-5:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٣ يوليو ٢٠٢٤

Woodworking machines — Safety — Part 5: Dimension saws

ملفات الوثيقة ISO 19085-5:2024

الإنجليزية 48 صفحات
الإصدار الحالي
72.89 BHD

مجال الوثيقة ISO 19085-5:2024

This document specifies the safety requirements and measures for dimension saws (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”.

The machines are designed to cut solid wood and material with similar physical characteristics to wood.

This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.

This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:

a)       device to raise and lower the main saw blade and scoring saw blade;

b)       device to tilt the main saw blade and scoring saw blade for angled cutting in one or both directions;

c)        device for scoring;

d)       device for grooving with milling tool with a width not exceeding 20 mm;

e)       demountable power feed unit;

f)         power-operated sliding table;

g)       workpiece clamping.

This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/PAS 8800:2024
 
مواصفة قياسية دولية
Road vehicles — Safety and artificial intelligence
ISO 19880-8:2024
 
مواصفة قياسية دولية
Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control
ISO/TR 27926:2024
 
مواصفة قياسية دولية
Carbon dioxide capture, transportation and geological storage — Carbon dioxide enhanced oil recovery (CO2-EOR) — Transitioning from EOR to storage
ISO/IEC 19566-10:2024
 
مواصفة قياسية دولية
Information technology — JPEG Systems — Part 10: Reference software