ISO 204:2023
International Standard
Current Edition
·
Approved on
25 July 2023
·
Metallic materials — Uniaxial creep testing in tension — Method of test
ISO 204:2023 Files
null Pages
Current Edition
ISO 204:2023 Scope
This document specifies the methods for:
a) uninterrupted creep tests with continuous monitoring of extension;
b) interrupted creep tests with periodic measurement of elongation;
c) stress rupture tests where normally only the time to fracture is measured;
d) a test to verify that a predetermined time can be exceeded under a given force, with the elongation or extension not necessarily being reported.
NOTE A creep test can be continued until fracture has occurred or it can be stopped before fracture.
Best Sellers
GSO 150-2:2013
Gulf Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
BH GSO 150-2:2015
GSO 150-2:2013
Bahraini Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
![BH Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_bh_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
BH GSO 2055-1:2016
GSO 2055-1:2015
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
![BH Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_bh_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2055-1:2015
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published
ISO/PAS 8329:2024
International Standard
Extended master connection file (χMCF) — Description of mechanical connections and joints in structural systems
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
IWA 45:2024
International Standard
Sustainable critical mineral supply chains
ISO/TS 5462:2024
International Standard
Rubber latex coated fabric gloves — Specification
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
ISO 19085-9:2024
International Standard
Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)