ISO 17386:2023

International Standard   Current Edition · Approved on 26 May 2023

Intelligent transport systems — Manoeuvring aids for low-speed operation (MALSO) — Performance requirements and test procedures

ISO 17386:2023 Files

English 21 Pages
Current Edition
54.2 BHD

ISO 17386:2023 Scope

This document addresses light-duty vehicles, such as passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded) equipped with Manoeuvring Aids for Low Speed Operation (MALSO) systems. It specifies the minimum functionality requirements which the driver can generally expect of the device, i.e. detection of and information on the presence of relevant obstacles within a defined (short) detection range. It defines minimum requirements for failure indication as well as performance test procedures; it includes rules for the general information strategy but does not restrict the kind of information or display system.

MALSO systems use object-detection devices (sensors) for ranging in order to provide the driver with information based on the distance to obstacles. Although sensing technology is not addressed in this document, technology does affect the performance-test procedures set up in Clause 7. The current test objects are defined based on systems using ultrasonic sensors, which reflect the most commonly used technology at the time of publication. For other sensing technologies which will potentially emerge in the future, these test objects shall be checked and changed if required.

Visibility-enhancement systems like video-camera aids without distance ranging and warning are not covered by this document.

Reversing aids and obstacle-detection devices on heavy commercial vehicles are not addressed by this document.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO/ASTM TS 52949:2025
 
International Standard
Additive manufacturing of metals — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-EB equipment
ISO/TS 7815-2:2025
 
International Standard
Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 2: Specification of the secure vehicle interface
ISO 3506-4:2025
 
International Standard
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws with specified grades and hardness classes
ISO 5700:2025
 
International Standard
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions