ISO 18335:2024

International Standard   Current Edition · Approved on 31 January 2024

Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer

ISO 18335:2024 Files

English 6 Pages
Current Edition
20.31 BHD

ISO 18335:2024 Scope

This document specifies a procedure for determining dynamic viscosity, η, and density, ρ, for the calculation of kinematic viscosity, ν, of middle distillate fuels, fatty acid methyl ester fuels (FAME) and mixtures thereof, up to 60 % with middle distillate fuels, and lubricating oils (e.g. base oils, formulated oils), and synthetics, using a constant pressure viscometer. The range of kinematic viscosities covered in this test method is from 0,5 mm2/s to 2 000 mm2/s, with precision at 40 °C from 1,0 mm2/s to 1 286 mm2/s, and precision at 100 °C from 3,0 mm2/s to 157 mm2/s.

The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear stress and shear rate are proportional (Newtonian flow behaviour). However, if the viscosity changes significantly with the shear rate, comparison with other measuring methods is only permissible at similar shear rates.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 1952:2025
 
International Standard
Coal — Determination of extractable metals in dilute hydrochloric acid
ISO 5834-1:2025
 
International Standard
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
ISO 5834-3:2025
 
International Standard
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods after gamma irradiation in air
ISO 15238:2025
 
International Standard
Coal — Determination of total cadmium