ISO 18758:2026

International Standard   Current Edition · Approved on 04 November 2026

Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Safety requirements

ISO 18758:2026 Files

English 77 Pages
Current Edition
BHD 91.32

ISO 18758:2026 Scope

This document specifies the safety requirements for rock drill rigs and rock reinforcement rigs designed for the following underground or surface operations:

  1. blast hole drilling;
  2. rock reinforcement and consolidation (injection holes, pipe roofing, netting, bolting);
  3. drilling for secondary breaking;
  4. dimensional stone drilling;
  5. mineral prospecting, e.g. utilizing core drilling or reverse circulation drilling;
  6. water and methane drainage drilling;
  7. raise boring;

when used by a well-trained operator in accordance with the information for use and where sufficient measures have been taken to prevent unauthorized entry of persons to the area where machines are working.

NOTE            Machines can be designed for more than one of the operations above. See ISO 22932-4 and ISO 22932-5 for vocabulary.

This document is not applicable to the following machines: drill rigs for soil and rock mixture, Kelly drill rigs and casing drivers, cable tool drill rigs, pre-armouring machines, sonic drill rigs, shaft sinking drill rigs, crane attached drill rigs, drill rigs on derricks, scaling machines.

This document deals with the relevant and significant hazards, hazardous situations, or hazardous events, as listed in Annex C, when the machine is used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.

This document is not applicable to machines manufactured before the date of its publication.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 9:2023
GSO 9:2022 
Bahraini Technical Regulation
Labeling of prepackaged food stuffs
GSO 9:2022
 
Gulf Technical Regulation
Labeling of prepackaged food stuffs

Recently Published

ISO 21815-4:2026
 
International Standard
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 21611:2026
 
International Standard
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 4576:2026
 
International Standard
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
International Standard
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C