ISO 11898-1:2024

 
International Standard   Current Edition
· Approved on 24 May 2024 ·

Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical coding sublayer

ISO 11898-1:2024 Files

English 82 Pages
Current Edition
93.29 BHD

ISO 11898-1:2024 Scope

This document specifies the controller area network (CAN) data link layer (DLL) and the physical coding sub-layer (PCS). The CAN DLL features data fields of up to 2048 byte when the CAN extended data field length (XL) frame format is used.

This document divides the CAN DLL into the logical link control (LLC) and the medium access control (MAC) sub-layers. The DLL’s service data unit (SDU), which interfaces the LLC and the MAC, is implemented by means of the LLC frame. The LLC frame also features the service data unit type (SDT) and the virtual CAN channel identifier (VCID), which provide higher-layer protocol configuration and identification information. How the higher-layer functions are handled is not specified in this document. There are five implementation options:

1)       support of the CAN classic frame format only, not tolerating the CAN flexible data rate (FD) frame format;

2)       support of the CAN classic frame format and tolerating the CAN FD frame format;

3)       support of the CAN classic frame format and the CAN FD frame format;

4)       support of the CAN classic frame format, the CAN FD frame format and the CAN XL frame format;

5)       support of the CAN FD frame format for CAN FD light responders (Annex A).

NOTE            Nodes of the first option can communicate with nodes of the third and fourth option when only the CAN classic frame format is used. Nodes of the first option cannot communicate with nodes of the fifth option: any attempt at communication generates error frames. Therefore, new designs implementing the fourth option can communicate with all other nodes.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 11326:2024
 
International Standard
Ships and marine technology — Test procedures for liquid hydrogen storage tank of hydrogen ships
ISO 13209-4:2024
 
International Standard
Road vehicles — Open Test sequence eXchange format (OTX) — Part 4: Expanded extensions interface definition
ISO 16813:2024
 
International Standard
Building environment design — Indoor environment — General principles
GSO 194-1:2024
 
Gulf Technical Regulation
Wheat Flour