ISO 13680:2024

International Standard   Current Edition
· Approved on 17 May 2024 ·

Oil and gas industries including lower carbon energy — Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions

Steel pipes and tubes for specific use
Including hollow steel bars and sections for construction

ISO 13680:2024 Files

null Pages
Current Edition

ISO 13680:2024 Scope

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:

PSL-1, which is the basis of this document;

PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series or NACE MR0175.

This document contains no provisions relating to the connection of individual lengths of pipe. Demonstration of conformance to ISO 15156-3:2020 or NACE MR0175-2021 of material affected by end sizing, connection manufacture or welding operations is outside the scope of this document.

This document contains provisions relating to marking of tubing and casing after threading.

This document is applicable to the following five groups of products:

a)       group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;

b)       group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;

c)        group 3, which is composed of stainless alloys with an austenitic structure (iron base);

d)       group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);

e)       group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-1:2015
GSO 150-1:2013 
Bahraini Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates
GSO 150-1:2013
 
Gulf Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates

Recently Published

ISO 2930:2024
 
International Standard
Raw, natural rubber — Determination of the plasticity retention index (PRI)
ISO/TR 22762-7:2024
 
International Standard
Elastomeric seismic-protection isolators — Part 7: Relationship of the ISO 22762 series to the design and testing of seismic isolation systems
ISO 10714:2024
 
International Standard
Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method
ISO/IEC 23090-3:2024
 
International Standard
Information technology — Coded representation of immersive media — Part 3: Versatile video coding