ISO/TS 20065:2022

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ ١٩ ديسمبر ٢٠٢٢ ·

Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method

الضجيج وتأثيره على الإنسان
* يشمل قياس السمع * واقيات الأذن، انظر 13.340.20 * الصوتيات والقياسات الصوتية، انظر 17.140

ملفات الوثيقة ISO/TS 20065:2022

الإنجليزية 33 صفحات
الإصدار الحالي
65.6 BHD

مجال الوثيقة ISO/TS 20065:2022

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 24232:2024
 
مواصفة قياسية دولية
Protective clothing — Protection against rain
ISO 9241-920:2024
 
مواصفة قياسية دولية
Ergonomics of human-system interaction — Part 920: Tactile and haptic interactions
ISO 7683:2024
 
مواصفة قياسية دولية
Design criteria and test methods for removable shrink labels applied to PET bottles
ISO 7661:2024
 
مواصفة قياسية دولية
Aerospace fluid systems — Clamp blocks for tube lines having axial alignment — Design requirements and qualification testing (metric series)