ISO/TS 20065:2022

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٩ ديسمبر ٢٠٢٢

Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method

ملفات الوثيقة ISO/TS 20065:2022

الإنجليزية 33 صفحات
الإصدار الحالي
72.5 BHD

مجال الوثيقة ISO/TS 20065:2022

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 2055-1:2016
GSO 2055-1:2015 
لائحة فنية بحرينية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 20589:2025
 
مواصفة قياسية دولية
Glass in building — Determination of the emissivity
ISO 11265:2025
 
مواصفة قياسية دولية
Environmental solid matrices — Determination of the specific electrical conductivity
ISO 11465:2025
 
مواصفة قياسية دولية
Sludge and solid environmental matrices — Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 9350:2025
 
مواصفة قياسية دولية
Corrosion of metals and alloys — Testing method of corrosion resistance for hafnium at high temperature and pressure