ISO 20122:2024

International Standard   Current Edition · Approved on 09 April 2024

Vegetable oils — Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with online-coupled high performance liquid chromatography-gas chromatography-flame ionization detection (HPLC-GC-FID) analysis — Method for low limit of quantification

ISO 20122:2024 Files

English 42 Pages
Current Edition
77.48 BHD

ISO 20122:2024 Scope

This document specifies a procedure for the determination of saturated and aromatic hydrocarbons (from C10 to C50) in vegetable fats and oils using the online-coupled high performance liquid chromatography-gas chromatography-flame ionization detection (HPLC-GC-FID). This document does not apply to other matrices.

The method is applicable for the analysis of mineral oil saturated hydrocarbons (MOSH) and/or mineral oil aromatic hydrocarbons (MOAH).

According to the results of the interlaboratory studies, the method has been proven suitable for MOSH mass concentrations above 3 mg/kg and MOAH mass concentrations above 2 mg/kg.

In case of suspected interferences, the fossil origin of the MOSH and MOAH fraction can be verified by examination by GC⨯GC-MS.

An alternative method for the epoxidation of the MOAH fraction (performic acid epoxidation) is proposed in Annex C. This alternative method provides comparable results to the ethanolic epoxidation of the MOAH fraction described in 8.6. This alternative method for epoxidation has proven to be efficient for samples with a high amount of interferences in the MOAH fraction (e.g. tropical oils).

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 150-2:2015
GSO 150-2:2013 
Bahraini Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
BH GSO 2055-1:2016
GSO 2055-1:2015 
Bahraini Technical Regulation
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 4211-1:2025
 
International Standard
Furniture — Tests for surface finishes — Part 1: Assessment of resistance to cold liquids
ISO 11843-7:2025
 
International Standard
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
ISO 18750:2025
 
International Standard
Intelligent transport systems — Local dynamic map
ISO 4076:2025
 
International Standard
Polyphenylsulfone (PPSU) — Effect of time and temperature on expected strength